KANEXPRO
MX-HDBASE6X6-4k
11 |
P a g e
Check if the input is
with HDCP
Y means the input signal is
with HDCP, N means not.
Check if the output
is with HDCP
Y means the output signal is
with HDCP, N means not.
Check the output
resolution
Use the
UP
and
DOWN
direction button to check all
the 4 output resolutions.
Output check
Press any output button to check its corresponding input.
Example: Check which one is the corresponding input for output 2. (Presume Output 2
corresponds to Input 1.)
Operation: Press Output 2 button, LCD screen display “AV: 1->2 IR: 1->2”, and
indicators of input 1 and output 2 turn on and last for 3 seconds. Then output 2
corresponds to input 1.
4.1.4
Clear operation
When you switch output channel, learn EDID data, or set EDID data, press
Clear
button to withdraw the operation before you press “
ENTER
” to carry it on. When you
press it, the matrix will return to the previous status.
4.2
IR Control
By using IR & HDBaseT transmission technology, the MX-HDBASE6X6-4K has some
functions as follows:
1)
Control far-end output device from local.
2)
Control local input/output device remotely.
3)
Control the MX-HDBASE6X6-4K locally/remotely.