K&S KS 14100HDE ATSR, Руководство пользователя

Страница: 10 / 32

9
It is recommended to ground the generator before operating it for the first time.
Before starting the device, remember that the total power of the connected power
consumers should not exceed the rated power of the generator.
Types of Power Consumers and Start-up Current
There are two types of power consumers (electrical devices connected to the
generator): active and reactive. Active power consumers include all power
consumers, whose power input is converted into heat (heaters).
Reactive power consumers include all power consumers equipped with an electric
motor. When starting the engine, start-up current occur briefly, the magnitude
of which is based on the engine design and purpose. The magnitude of occurring
start-up currents should be considered when selecting a generator.
Most electric tools have a start-up current ratio of 2-3. This means that the
operation of such tools requires a generator, the power of which is 2-3 times the
power of the connected power consumer. Power consumers such as compressors,
pumps, washing machines have the highest start-up current ratio.
CHECK BEFORE GETTING STARTED
Checking the fuel level
1. Unscrew the fuel cap and check the fuel level in the tank.
2. Fill fuel to the level of the fuel filter and make sure there is no air in the fuel
system.
3. Tighten the fuel cap securely.
Fig. 2
Checking the oil level (Fig. 2)
1. Unscrew the oil dipstick and wipe it
out with a clean cloth.
2. Insert the dipstick without screwing
it in.
3. Check the oil level by a mark on the
oil dipstick.
4. Add oil if its level is below the mark
on the oil dipstick.
5. Tighten the oil dipstick.
FILL TO
THIS
LEVEL
TERMS OF USE OF DIESEL GENERATOR