11
8. Guide the white pin up through the high E string hole
from the inside and secure the jig by moving the golf
tee to the G string hole from the outside and finding the
oblong hole in the jig. This will align the jig exactly as
was done in step 3, during the practice run.
9. Once you confirmed that the procedure works as
intended, you can apply glue the golden side of the
pickup and glue it in. Please ensure that the putty still
holds the pickup firmly in place after the trial run. Use a
fresh piece of putty if necessary.
Use a good amount of glue and spread it generously
over the golden surface of the pickup. You should use
enough glue to cover the entire surface of the pickup.
It is best if some glue “oozes” out around the pickup as
you install it.
The most common source
of sound issues and
transmission problems with
the Pure pickups is using too
little glue for the pickup to
bond properly to the bridge
plate.
