Fuse and Bulb
103
Fuse and Bulb
Fuse
Replace the Fuse.
Fuse must be replaced if it is burned out.
Fuse box cover on the left side of dashboard
−
Find the fuse that corresponds to faulty appliance.
−
Turn off the ignition system and related electrical appliances.
−
Remove fuse box cover.
−
Remove the yellow plastic clip from fuse block and insert it
into the suspected fuse, then pull them out.
−
If the fuse has been burned out (which can be identified by a
blown metal sheet), replace it with a new fuse with the same
specification.
All circuits on the vehicle are protected by the fusible fuses. The
fuse block with fusible fuses is located at left side of instrument
panel. In addition, a label indicating the corresponding fuse
location is applied on the fuse block cover of instrument panel.
Caution!
Neither “repair” fuse or replace the replace the fuse with one
which has a high current, otherwise, there is a risk of fire! Also, it
may cause damage to other parts of electronic system.
Instruction
If the newly replaced fuse is burned out again soon, it is necessary
to take the vehicle to KANDI-authorized service shop for inspection
of electronic equipment.
Fuse Box on the Left Side of Dashboard
Some appliances listed on fuse block label are only applicable for
special models or optional equipment.
Note that the block labels below should be as the same as they
were printed and have been changed. If there is any difference, it
