MULTICAL® 803
Kamstrup A/S · Technical description · 5512-2360_A1_GB_02.2019
75
6.1
USER loop
USER loop is the calculator’s primary loop, which includes legal and mostly used readings. The loop is intended for
the user and is configured according to the user’s requirements via the DDD code. See paragraph 3.3.4 for further
information about the USER loop and DDD codes.
Note: No display index numbers are used in the USER loop.
6.2
TECH loop
The TECH loop is intended for the technician who is interested in viewing more readings than the ones available in
the USER loop.
The TECH loop contains all display readings, except for logged values and the differential
registers (∆E and ∆V), and
this loop is
not
configurable. The module readings consist of a number of fixed readings as well as a number of
readings that depend on the installed modules.
The calculator’s TECH loop is shown below. You change back and forth between the readings by means of the arrow
keys while pressing the primary key briefly causes the change between the primary and secondary readings.
TECH loop
Display
Primary display
Secondary display
Index
number in
display
Logging
depth/Ref.
number
1
Heat energy E1
2-001-00
1.1
Date of yearly logger
2-001-01
Log 01-02
1.2
Data of yearly logger
1
2-001-02
1.3
Date of monthly logger
2-001-03
Log 01-12
1.4
Data of monthly logger
1
2-001-04
1.5
E1 high res.
2-001-05
2
Cooling energy E3
2-002-00
2.1
Date of yearly logger
2-002-01
Log 01-02
2.2
Data of yearly logger
1
2-002-02
2.3
Date of monthly logger
2-002-03
Log 01-12
2.4
Data of monthly logger
1
2-002-04
2.5
E3 High resolution
2-002-05