9
Kamstrup A/S • 5512687_C2_GB_09.2016
GSM6H
8 SMS commands
NOTE:
SMS commands must be sent in either capital or small letters. Capital and small letters
must not be mixed in the same SMS command.
SIGNAL - for reading the signal strength
Syntaks, command
=SIGNAL#
Syntax, return answer
Signal: <signal strength> (0-31)
Example
=SIGNAL#
Return answer, correct
Signal: 14 (0-31)
Return answer, error
NO ANSWER
READ_HEAT_METER – For reading MULTICAL® 801 / MULTICAL® 602
Syntax
=READ_HEAT_METER#
Example 1
=READ_HEAT_METER#
Response, correct
The following values are read:
Acc. energy: [KWh], [MWh], [GJ] or [GCal]
Current power: [kW] or [MW]
Acc. water consumption: [m
3
]
Current water consumption: [l/h] or [m
3
/h]
Meter number:
Temperature: [C]
Info code:
Hour counter:
114931.6 MWh,
25.99 MW,
1657074 m
3
379.8 m
3
/h,
Meter No.: 5300279,
T1: 93.15 C,
T2: 32.00 C,
Info code: 0,
7373 Hours
Return response, meter error
No meter response
Return response, command error
NO RESPONSE
READ_PRESSURE – For reading MULTICAL® 801 / MULTICAL® 602
Syntax
=READ_PRESSURE#
Example 1
=READ_PRESSURE#
Response, correct
The following values are read:
Pressure: [bar]
Meter number:
2.34 bar,
2.23 bar,
Meter No.: 6349933
Return response, meter error
No meter response
Return response, command error
NO RESPONSE
