manualshive.com logo in svg

Kamstrup flowIQ 3100 Series, Техническое описание, Страница: 63 / 68

Поделиться
Скачать
Kamstrup flowIQ 3100 Series Скачать руководство пользователя страница 63

flowIQ® 3100                                                                                           TECHNICAL DESCRIPTION 
          

 

 

Kamstrup 

A/S • Technical Description • 5512

-1242_N1

_GB • 

10.2019 

 

63

 

 

20

 

Data communication 

The meter has built-in communication as Wireless M-Bus, Sigfox  or Wired M-Bus. 

Note! It is one-way data transmission 

from

 the meter 

–

 no data receipt in meter.  

20.1

 

Transmission 

Data packages are sent at intervals of approx. 16 or 96

 

seconds. Every eights package is a full data string, whereas 

the 7 intervening packages are compact data strings. Sigfox data packages are sent on a daily basis.  

The nominal transmission power is: 

Drive-by mode:  

10 Mw    

Fixed Network:  

25 Mw    

IoT/Sigfox:   

19 Mw 

 
Note! The content of the data package is updated at every transmission. 

20.2

 

RADIO OFF 

Radio transmission has been interrupted if ‘RADIO OFF’ is displayed. 

 

RADIO  OFF  is  activated  at the end  of  the  production process  at  Kamstrup  A/S. The meter  removes  RADIO  OFF 
automatically, when the volume register has counted water consumption for approx. 5 seconds. 

RADIO OFF  is intended for situations where radio transmission is inappropriate 

–

 e.g. in laboratories, in warehouses 

and during air transport, where many meters will typically be concentrated in one place. 

It is not possible to stop the radio transmission of a meter in normal operation permanently, but the meter can be 
turned OFF by means of the optical eye e.g. in advance of air transport. However, the radio will automatically turn 
ON again, as soon as a water flow is registered.  

RADIO OFF secures that the meter does not send radio communication until the meter is put into operation for the 
first time.  

20.3

 

Data content 

 
The data package in the data transmission partly depends on the communication module configuration, chosen 
when ordering the meter. 
 
Some reconfiguration of the data package and change of the communication module can be done afterwards, with 

the software program ‘Datatool’

 

 
Module number in the configuration is:   031-

XX

-XX-X-X        

 
Details and information about data packages and communication modules are available on Kamstrup web page.   

20.4

 

Encryption 

flowIQ® 3100 can be ordered without or with encryption

*)

 of data transmission.

 

 If encryption of data is selected, it 

consists of 128 bit AES counter mode encryption. Kamstrup A/S recommends encryption. 

*)

 

Meters produced for Russia will always be WITHOUT encryption. 

 

Содержание flowIQ 3100 Series





































































Отзывы:

Нет отзывов