Venkon
Assembly, installation and operating instructions
49
Fig. 43: Dismantling the float switch
Loosen the screw on the retaining plate and remove the retaining plate with the
float switch fitted. Carefully remove the black hose bend from the underside of
the valve condensation tray.
Fig. 44: Clean the float switch.
Remove the cover and clean the open float switch.
After cleaning, make sure that the float switch is water-tight when you as-
semble it!
9.3.6 Clean the inside of the unit
Check all elements that come into contact with air (internal surfaces of the unit, outlet elements etc.) for dirt or deposits dur-
ing maintenance and use a commercially available product to remove.
