Kampmann Venkon XL UL, Инструкция по сборке, установке и эксплуатации

Страница: 18 / 56

Venkon XL UL
Assembly, installation and operating instructions
18
6.2 Requirements governing the installation site
Only install and assemble the unit if the following conditions are met:
Make sure that the wall/ceiling is sufficiently load-bearing to take the weight of the unit (
Technical data [
}
12]
).
Make sure that the unit is securely suspended/standing.
Ensure that the airflow can circulate freely.
Provide adequate space for appropriately sized flow and return water connections on site (
Connection to the pipe
network [
}
27]
).
There is a power supply on site ( Maximum electrical rating values [
}
41] ).
If need be, provide a condensation connection with a sufficient gradient on site.
6.3 Minimum clearances
Wall mounting Ceiling mounting Minimum distances Size 1-4
Mounting and inspection areas
Mounting area Duct system
Inspection area Inspection area
* The air outlet area must be completely
unobstructed to ensure unhindered air
circulation! At least 2 inches must be
freely accessible above the cladding in
order to be able to remove the cladding.
Air outlet area*