Ultra Allround
Assembly, installation and operating instructions
15
6
Installation and wiring
6.1
Requirements governing the installation site
Only install and assemble the unit if the following conditions are met:
Make sure that the unit is securely suspended/standing.
Ensure that the airflow can circulate freely.
Provide adequate space for appropriately sized flow and return water connections on site (
There is a power supply on site (
Maximum electrical rating values [
6.2
Installation height and throws
When suspending the units, pay attention to the maximum installation heights and throws! Make sure that the units are sus-
pended vibration-free (using rubber vibration elements if necessary).
With an installation height of < 3.5 m, make sure that the air is discharged horizontally in heating mode to avoid draughts in
the occupied zone.
Fig. 2: Maximum installation heights and throws
Type series
Voltage [V]
Max. installation height Hmax [m]
Models 1 and 2
10
8
8
6.5
6
4.5
4
3
2
2.3
Содержание Ultra Allround
Страница 2: ......