Kampmann PowerKon LT, Инструкция по сборке, установке и эксплуатации, Страница: 28 / 52

PowerKon LT
PowerKon LT
Assembly, installation and operating instructions
28
7 Electrical connection
7.1 Maximum electrical rating values
Size Nominal
voltage [V̴] Mains fre-
quency [Hz] Nominal
power [W] Nominal cur-
rent [A] Ri analogue in-
put [KΩ] IP class Protection class
1 230 50 19.5 0.16 100 IP21 I
2 230 50 27.3 0.23 100 IP21 I
3 230 50 34.8 0.30 100 IP21 I
Tab. 7: Maximum electrical rating values PowerKon LT
7.2 Electromechanical connection, 230 V (*00)
Circuit description (*00)
Factory-fitted actuators are wired to the terminals.
The appropriate terminals are available for valve actuators or a condensate pump.
The EC fans used can be continuously variably controlled by a 0-10 V DC signal. The “intelligent” motor electronics de-
tects any possible motor malfunction and automatically switches off the fan.
1 2
3
X1: Mains power connection (L, N, PE)
X2: Terminals (for condensate alarm or actuator 230 V etc.)
X3: 24 V DC fan and actuator connecting terminals