Kampmann 30515, Инструкция по сборке и установке

Страница: 6 / 30

6
1.96 Electronic continuously variable speed controller
recirculating air with digital timer and room temperature control, type 30515
Assembly and installation instructions
3.1 Cabling
General information
• Lay all low voltage cables along the shortest route (room temperature
sensor, digital inputs).
• Separate low voltage and power lines, for example, by a distance of at
least 20 cm, possibly using metallic partitions on cable harnesses etc.
3.2 Cabling diagram
Air heaters with EC fans, types ending in 33, 34, 60
illustrated:Ultra, (see page 7, Figure 4)
3.3 Fuse
The unit has a fuse 5x20 mm fuse, T5AL, fitted in the mains power
supply input circuit.
Fig. 3: Unit fuse in the mains power
supply (main board)