19
Electronic continuously variable speed controller
1.96
recirculating air with digital timer and room temperature control, type 30515
Assembly and installation instructions
5.7 Default programs
Programs P01-03:
The on and off times for programs P01 to P03 are pre-set (PRE). The
user can change these programs.
Individual program, P- -:
An individual program can be entered under menu option P--. This
program can be changed at any time. A total of 20 memory locations
for 10 OFF and 10 ON switching commands are available. A day or
week block can be allocated to every memory location.
Selection of default programs:
Procedure after setting the time in Reset mode:
• Select a default program.
The following options are available after selecting the desired program:
Menu:
Exit Programming
OK:
Press the OK button to call up default programs to change the
selection (programmed ON or OFF switching commands can be
changed with the ''+'' or ''-''keys and be confirmed with OK) or
by pressing OK. You can then also move to the next free memory
location to add new individual programs (see following page).
After selecting P02, program:
Sa-Su 22:30
ON
(prog05)
23:00
OFF
(prog06)
Содержание 30515
Страница 29: ......
