Kamoer CV-KAM-X2SR, Руководство пользователя, Страница: 17 / 20

1.Device name and version: View device name and version
2.Name: Set the name of the device
3.Serial number: View device serial number
4. Firmware upgrade: If a new firmware version appears, you can upgrade the firmware here
5. Time setting: If the scheduled time of the device operation is not accurate, you can synchronize the
time here
6.Connect to the smart controller: Set the device to connect to the Kamoer smart controller, this
function is temporarily not supported
7.Speed setting: Perform flow rate calibration here
8.Restore factory settings: Click to restore factory settings
9.Remove device: Click to remove the binding between App and device
3.7 Calibration
When it is found that the water change flow is inaccurate, it is necessary to calibrate the flow of the water
change pump, and enter the flow calibration interface of the water change pump through Settings -> Flow