Kamoer CV-KAM-X2SR, Руководство пользователя, Страница: 13 / 20

When you need to change the water manually, you can switch to the manual water change mode in the title
bar of the water change module
1. Manual water change: Here to switch between manual water change and automatic water change
2.Drainage: Control the running and stopping of the drain pump, click to enter to set a running volume,
and the function of automatically replenishing water after draining
3.Seawater supplement: Control the operation and stop of the seawater supplement pump, click to
enter to set a running volume
4.Make-up fresh water: Control the operation and stop of the make-up fresh water pump, click to enter
to set a running volume
5.Operating volume: The pump operating volume setting, the pump will automatically stop after it
reaches the operating volume after it starts running manually
6.Automatic water replenishment after draining: This function is to automatically start the water
replenishment pump after the drain pump work is completed. The default water replenishment pump and
the drain water pump run the same amount
3.4.1 Automatic water change
When you need to change the water automatically, you can switch to the automatic water change mode in
the title bar of the water change module