Kamco
CombiMag SOLO
| Increases Speed & Efficiency of Power Flushing
TEL: 01727 875020 | WWW.KAMCO.CO.UK | [email protected]
Kamco, Unit 9, Curo Park, Frogmore, St Albans. Herts, AL2 2DD, UK © KAMCO Ltd.
KAMCO and CLEARFLOW are registered trademarks of Kamco Limited UK.
CombiMag SOLO
| Magnetic Power Flushing Filter
1
YEAR
PARTS & LABOUR
WARRANTY
Supplied with
protective
tool case
BUILDING PUMPS
SINCE 1992
Kamco
F
11,000 gauss of magnetic power.
F
Transparent cylinder gives visible indication of system
contamination and the need to clean magnet.
F
Reduces time taken to power flush a system.
F
Reduces black iron oxide discharged to waste.
F
Increases power flushing efficiency.
F
Minimises water consumption during power flushing.
F
Prevents re-circulation of debris through the boiler.
F
By-pass enables filter to be cleaned without interrupting power
flush process.
POWER FLUSHING IS THE MOST EFFECTIVE METHOD OF CLEANING EXISTING HEATING
SYSTEMS, ESPECIALLY THOSE CONTAINING LARGE QUANTITIES OF CORROSION DEBRIS.
Clear water is forced through a system, pushing debris ahead of it,
and this continues until the dump water finally runs clear. This may
take a considerable time.
The
CombiMag SOLO
power flush filter has been developed to
quickly remove circulating black iron oxide contamination from the
flushing water, using the power of a rare earth magnet to capture
magnetic iron oxides from the water flow.
The
CombiMag
SOLO
filter is installed in line with any power
flushing pump. The cyclone construction directs contaminated
water through a powerful magnetic field, such that even the
smallest of particles are retained on the central magnet, from
which they may be easily cleaned during and after power flushing.
Power flushing is the fastest and most effective means of
cleansing sludge and corrosion debris from central heating
systems, utilising a high flow of water to loosen and ultimately
expel the debris, usually containing large quantities of black iron
oxide, from the system.
Collected debris, which may otherwise lead to blockages in small
bore pipework, is prevented from re-entering the heating system.
The rapid removal of debris from the flushing water prevents
saturation of the cleaning solution with black sludge, leading to a
more effective power flush.
The time savings on every job when using the
CombiMag SOLO
power flush filter will rapidly cover its cost, reducing the job time
and consequent disruption for householders.
The debris retained on the magnet is an impressive visual aid. It
demonstrates to householders what has been removed from the
system, confirms the need for the power flush, and demonstrates
that the clean has been professionally carried out
The increased efficiency of power flushing when using a
CombiMag SOLO
filter reduces heating costs and results in a
more efficient heating system.
CombiMag
Clearflow Pump
FLOW
circulator
pump
RETURN
boiler
Extra hose supplied
with CombiMag
Kamco
