use and operation
1 Ensure the load to be elevated is held securely by the chains and fit
these through the securing holes in the frame. Check that they are
firmly attached.
2 By turning the handle, place the support in the center of the frame.
3 Then enter the support into the crane or elevation system hook and lift
the load gently, ensuring that it remains leveled. If this is not the case,
slowly lower the load and find the balance point, moving the roller sup-
port with the handle.
4 Never try to balance the load while it is suspended.
5 Never keep a load elevated on the leveler longer than necessary to
position it in the desired place.
6 Lower the load softly and make sure it is on a firm, regular and horizon-
tal surface where it will not slide around.
7 Remove the leveler from the crane or elevation device.
Maintenance
1 Keep the leveler clean and regularly lubricate all moving parts.
2 Before each use, carry out a visual inspection and rectify any deficiency
found before putting into operation.
www.kamasatools.com
K 21228
K 21228
Load leveler
