Nanu
Selecting this menu will allow manual control of the RGB LEDs.
Press the menu button until Nanu is displayed, press enter to confirm.
R*** will display, using the up / down buttons will control the brightness of the red LEDs, 000-255.
00 = off, 255 = full brightness. Press enter to confirm
G*** will be displayed using the up / down buttons will control the brightness of the green LEDs, 000-255.
00 = off 255 = full brightness. Press enter to confirm
B*** will be displayed using the up / down buttons will control the brightness of the blue led’s, 000-255
00 = off 255 = full brightness. Press enter to confirm
Colo
This menu allows the user to select one of the 99 colour effects built into the controller. Use the menu button to
select Colo, press enter to confirm. C*** will display. Use the up/down buttons to select the desired program 001-
099. Press enter to confirm.
Fade
The fade menu allows the user to select one of the built in fade programs. This will fade from one colour to
another. Use the menu button to select fade, press enter to confirm. FF** will display. Use the up/down buttons to
select the desired program 01-099. Press enter to confirm
Junp
This menu allows the user to select one of the 99 built in programs that flash between colours. Use the menu
button to select fade, press enter to confirm. ju** will display. Use the up/down buttons to select the desired
program 01-099. Press enter to confirm.
Fl ** will display. This will change the speed of flash of the junp program selected. Use the up/down buttons to
select the desired program 00-04, press enter to confirm.
Flsh
This menu allows the user to select one of the 52 built in flash speeds. This changes the rate of flash speed when
using the Colo function. Use the menu button to select Flsh, press enter to confirm. fl** will display. 00 = no flash,
052 = fast flash. Use the up/down buttons to select the desired program 00-051. Press enter to confirm.
Auto
When selecting the Auto mode it will run through the built in programs automatically. Use the menu button to select
auto, press enter to confirm.
Soun
Sound activated mode. Use the menu button to select soun, press enter to confirm. Sd** will display, 01 =
minimum sensitivity, 030 = maximum sensitivity. Use the the up/down buttons to select the desired sensitivity 01-
030. Press enter to confirm. The programs will now be activated by the beat of the music
Slau
Use the menu button to select slau, press enter to confirm. This puts the unit into slave mode. When connecting
several units together via a DMX cable but NOT using a DMX controller. Use the first unit as a MASTER unit and
select one of the desired programs or functions above, set all other connected units to slave mode and link with a
DMX lead. All connected slave units will follow the master unit.
NOTE - only one unit must be set as a master unit and all others as slaves.
CHnd
This menu allows the user to select how many DMX channels will control the unit. Press the menu button until
CHnd is displayed, then press enter to confirm. 3ch/5ch/7ch will be displayed, use the up/down buttons to select
the desired amount of DMX control channels required. Press enter to confirm. There are options for 3ch, 5ch and
7ch control. See DMX protocol charts for functions of the DMX channel.
