18
www.KALORIK.com
FT 43721 - 200605
user serviceable parts and requires little maintenance. Leave any
servicing or repairs to qualified personnel.
WARNING:
‒
Always turn the temperature control knob
(24)
to the
0
position,
disconnect the plug
(17)
from the wall outlet and then the
magnetic plug
(18)
from the control panel assembly
(22)
before
cleaning. Allow all parts of the appliance to cool down
completely.
NOTE:
‒
Do not immerse the power cord with plug
(17)
, magnetic plug
(18)
or appliance into water or any other liquids. Do not use
abrasive cleaners, steel wool or scouring pads. Dry all parts
thoroughly after cleaning, before using or storing the appliance.
Ensure that no water enters the appliance housing
(13)
.
‒
Do not attempt to attach the magnetic plug
(18)
permanently
to the appliance.
‒
Do not attempt to remove the silicon rubber sealing plate
(23)
.
•
Ensure the oil container
(15)
is in place, then turn the oil filtration
control knob
(14)
to
FILTER OIL
position to empty the oil reservoir
(9)
(see Oil filtration).
•
Place the basket
(6)
on a clean, flat and heat resistant surface.
Danger of burns!
‒
Ensure the basket
(6)
cooled down completely before touching
its surface and attempting to remove the basket handle
(7)
.
‒
Ensure the oil cooled down completely before emptying the oil
reservoir
(9)
into the oil container
(15)
.
•
Remove the basket handle
(7)
from the basket
(6)
.
•
Remove the control panel assembly
(22)
from the oil reservoir
(9)
.
Carefully clean the control panel assembly
(22)
and immersion
heater
(21)
with a damp cloth.
•
Pull the oil filter cover
(11)
from the oil reservoir
(9)
and then remove
the oil reservoir
(9)
from the housing
(13)
.
•
Open the lid filter cover
(29)
and remove both black and white
filters
(27, 28)
(ill. u).
•
Clean the appliance housing
(13)
with a damp cloth.
