Kali Audio LP-UNF Users’ Guide
8
Inputs and Controls
Front Panel
LED Indicator
Limiter Indication
When the limiter engages, the front LED will flash during playback. If the lim-
iter is engaging on only one channel, it will flash on that side. The limiter pre-
vents harmful voltage from reaching sensitive components in your loudspeak-
er. It is advised to lower the output level of your system if you see the limiter
engage.
Speaker Channel Assignment
By default, the primary speaker will play the left channel of audio. If you wish to
change this, you can set the primary speaker to play the right channel of audio.
To do this:
1. Using the power switch (4), power the system down. Wait until no LEDs are
illuminated.
2. Power the system back on. WAIT until all the LEDs on the front are illuminat-
ed.
3. When all the LEDs on the front are illumated, press and hold the “-” sign.
After about 5 seconds, one half of the LEDs will flash, indicating which channel
(left or right) the primary speaker will play.
4. If the channel indicated is not the channel you would like to play through the
primary, repeat steps 1-3. The LEDs should flash on the opposite side the sec-
ond time.
5. Turn the unit off and on one more time for the change to take effect.
