manualshive.com logo in svg

Kaleidescape premiere series, Руководство по установке

Поделиться
Скачать
Kaleidescape premiere series Скачать руководство пользователя страница 96

Kaleidescape Part No. 101-0105-00 Rev 5

Page 96

Kaleidescape Premiere Line Installation Guide

System Configuration

DVDs

The current DVD region and the number of remaining changes is reported in 
the 

DVDs

 section of the 

REGION

 page.

Most DVDs are authored for a specific region. Players and disc vaults must 
match that region to play or catalog the DVD.

Players in the same system can be set to different DVD regions. 

Use the following procedure to change the region setting to play a DVD from 
another region. 

1. Insert a DVD from the other region in the disc tray of an M500 Player, or 

into the disc vault.

2. Select the new DVD region from the 

DVD Region

 section. The default is 

1 - United States, U.S. territories, Canada, Bermuda

.

3. Click 

OK

. 

When the player or disc vault successfully reads the DVD from the other 
region, the change is complete.

Note:

The DVD region setting can only be changed four times.

On a Premiere system sold by Kaleidescape on or after November 30

th

 

2014, CSS-protected DVDs can only be cataloged. For more information, 
visit 

www.kaleidescape.com/protected-dvds

.

Screen Masking

Movie players send control messages with aspect ratio and screen masking 
information to the control system every time a movie plays.

Control systems use this information to position screen masks, engage 
special projection lenses, and adjust the aspect ratio mode of the display 

Содержание premiere series
















































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды