KVAULT ODD Replacement
December 2020
101-0269-00 Rev 2
Page 3 of 24
4.
If options 1-3 above are unsuccessful, discs may be removed
manually as described in step 10. This method will require an
additional 40 minutes upon start up for the Vault to self calibrate
before discs can be inserted.
Power Off and Disconnect
Disconnect the power cord, Ethernet, and audio/video cables from the back
of the disc vault.
Note: The drive replacement cannot be done with the unit in a rack.
Expose the Optical Disc Drive
1.
Remove the front panel by gripping each side and pulling it straight
from the disc vault. See Figure 1.
Figure 1
2.
Remove the disc vault from the rack. Use a Phillips screwdriver to
unmount the ears from the rack. A fully loaded vault weighs 49 lbs. A
two-person lift technique is required to safely remove a disc vault
from the rack.