KAL-FIRE Heat Pure Series 105T, Инструкция по установке и эксплуатации

Страница: 32 / 72

3. Mounting and installation
29
3.9 Baffle plate
Heat Pure 65 corner, 66 3-sided, 90 corner and 90 3-sided
The Heat Pure 65 corner, 65 3-sided, 90
corner and 90 3-sided have two removable
baffle plates. These baffle plates are situated
above the smoke hood just below the heat
exchanger.
The baffle plate ensures an optimal
combustion.
In the following situations, it may be
necessary to remove the baffle plate(s) or
decrease its the size.
•
Smoke return when the Heat Pure starts
•
Condensation in the flue duct
•
When the Heat Pure 65 corner, 65 3-
sided, Heat Pure 90 Corner and Heat Pure
90 3-sided are being used as an
open
fireplace
If necessary, you can adjust the baffle plates
as follows:
1. Remove the lower baffle plate and see if
this solves the problem. If the problem still
occurs, then also remove the upper baffle
plate. If the problem still isn’t solved, then
something else is the cause. If removing the
plate(s) solves the problem, proceed with the
next step.
2.
Cut away a strip of 3 cm wide, at the front and rear of the baffle
plate. If necessary, do this for both baffle plates.
A 3-sided and corner fireplace is always a more sensitive product than
a fireplace with a door at the front, particularly when used with an open
door. If the Heat-Pure 65 corner, 66-3-sided, Heat Pure 90 corner and
90 3-sided are used as an open fireplace, some smoke may flow back
into the room- even if both baffle plates have been removed.
Baffle plate