KAL-FIRE Heat Pure Series 105T Скачать руководство пользователя страница 14 | Manualshive

Страница: 14 / 72

KAL-FIRE Heat Pure Series 105T Скачать руководство пользователя страница 14

3. Mounting and installation

11

Pure.

5.

Test the internal fresh air valve for correct working. This valve is
situated on the rear of the Heat Pure, behind the fresh air
connection. When the door is closed, the fresh air flows into the
combustion chamber via the air slide valve. When the door is
opened, the fresh air flows into the combustion chamber via the
convection casing and outlet openings.

3.1.2 Heat Pure 80 tunnel and Heat Pure 105 tunnel

1.

Check immediately upon

arrival, if the products supplied are

complete and undamaged. Report any damaged or missing items to
the supplier immediately.

2.

Remove the transport security (screws with yellow sticker on the

front of the convection casing).

3.

Check the following parts for correct working:

- Lifting door up and down
- Forward tilting action of door for cleaning
- Air control
- Adjustment feet
- Any damper with control button (accessories)

- Any aeration valves (accessories)

4.

Hand the installation/user manual personally to the user of the Heat

Pure.

5.

Test the internal fresh air valve for correct working. This valve is

situated on the rear of the Heat Pure, behind the fresh air
connection. When the door is closed, the fresh air flows into the
combustion chamber via the air slide valve. When the door is
opened, the fresh air flows into the combustion chamber via the
convection casing and outlet openings.

«
...
12
13
14
15
16
...
»

Содержание Heat Pure Series 105T









































































Отзывы:

Нет отзывов