KAL-FIRE Heat Pure Series 105T Скачать руководство пользователя страница 13 | Manualshive

Страница: 13 / 72

KAL-FIRE Heat Pure Series 105T Скачать руководство пользователя страница 13

3. Mounting and installation

10

3

Mounting and installation

Before  installing  the  appliance,  check  if  the  load  bearing  capacity  of the
floor  is  sufficient  to  bear  the  weight  of  the  appliance  and  the  intended
surround  (see table 5) for a long period of time. If this is not the case,
please  take  the  necessary  precautions  (e.g.  distributing  the  pressure
points by using a dimensionally stable, fire resistant sheet)

3.1

Check before building in/mounting

3.1.1 Heat Pure 65 corner, 66 3-sided, 90 corner and 90 3-sided

1.

Check immediately upon

arrival if the products supplied are complete

and undamaged. Report any damaged or missing items to the supplier
immediately.

2.

Remove the transport security (Two screws in the convection duct with
yellow sticker on the rear of the convection casing).

3.

Check the following parts for correct working:

- Lifting door up and down
- Opening and closing the design doors
- Forward tilting action of door for cleaning
- Air control
- Adjustment feet
- Any damper with control button (accessories)
- Any aeration valves (accessories)

4.

Hand the installation/users manual personally to the user of the Heat

Heat Pure 3-sided

Heat Pure corner

«
...
11
12
13
14
15
...
»

Содержание Heat Pure Series 105T









































































Отзывы:

Нет отзывов