KAL-FIRE Fera 105, Инструкция по установке и эксплуатации, Страница: 18 / 27

35
II If the automatic burner unit (Figure 16) is accessible, this can be
reset by pressing in a reset knob (3). You can see that this is
locked by the red lamp (3).
After the reset cycle, lasting about 10 seconds,
you can re-start by simultaneously pressing the
ON and OFF knob.
3.3.2 Extinguishing the burners
To completely extinguish the fire, press the OFF
knob (Figure 14 no. 3) on the transmitter, and the main burners as
well as the pilot light will go out completely.
If the electricity supply is interrupted, the fire will also go out.
If you are going to be away for an extended period, it is advisable to
turn off the gas supply to the appliance.
3
Figure 16 resetting
36
4 Dimensions