KAKA Industrial BS-75G, Инструкция по сборке и эксплуатации, Страница: 5 / 25

risk. Cutting is not permitted, if the bar has not been first locked in the vice.
5. MAIN TECHNICAL DATA
Under no circumstances should the following data be altered, this is in order to protect the
correct functioning of the machine and to avoid creating safety risks for the operator.
MOTOR
Motor Power
Motor revolutions (two speeds)
Electric pump Three-phase or single-phase
KW 0.3/0.5
700-1400 rpm
KW 0.1
BLADE SIZE(length × width × thick)
Cutting thickness 2060 × 20 × 0.9
1.2 mm
Cutting speed 80-40 rpm
Cutting angle 45° right
Piece locking vice: max opening
Rapid clamping displacement
Jaws height
Jaws length
Clamping force
Bed height 215 mm
5 mm
80 mm
142 mm
350 kg – 3430 N
935 mm
Coolant tank capacity liters 4
Machine weight 160 kg-1570 N
6. HANDLING AND TRANSPORTATION
For safe handling and transportation use a lift truck for movement indoors also indicated on the
drawing 1 Encl.1. Keep the machine in its normal position and avoid turning it upside down.
If
the machine is fastened to the pedestal, stability will be greatly reduced and therefore all the
necessary measures should be taken to stop the machine from tipping over.
All handling and transportation operations should be carried out by trained staff.
7. MACHINE INSTALLATION
7.1 MACHINE CHECK
The machine should be checked to make sure that it has not been damaged during transportation
and handling. If the machine appears to have been damaged, contact us immediately. Fit all the
supplied accessories onto the machine such as the bar stop 91 (DRAW.4 ENCL.4) and the
roller arm 16 (DRAW.8 ENCL.6)
7.2 FASTENING OF THE MACHINE
The machine will be able to operate in keeping with the technical parameters supplied by us,
if it is positioned correctly and fastened securely to the bench or the factory floor so that
vibrations are minimal during operation. Consult drawing 2 machine Installation plan