Full Digital Color Doppler Ultrasonic Diagnostic Instruments (Vet) User’s Manual V1.01
- 48 -
Chapter 10 Measurements and Calculations
You can perform measurements on the ultrasound image, and the system automatically calculates the
measurement results. You can use the results to conclude the precise diagnostic information.
General measurements and specific measurements are provided.
Before measuring, you should be familiar with the measurement screen, measurement keys and menus
and preset the necessary parameters used in measurements.
10.1 Measurement Screen and Keys
Measurement Screen
Figure 10-1 Measurement Screen
Measurement Menu: Displays the measurement items and sub-items. For details, refer to Section 10.2
Measurement Menu.
Measurement Area: The user performs a measurement in the ultrasound image area.
Measurement Result box:
After the user makes a measurement, the measurement and calculation results
are displayed in the result box. Press
Clear
key to delete the measurement results and measurement ruler.
Keys
The following keys are used to perform the measurements and calculations:
Name
Functions
Caliper
Used to activate the general measurement and calculation.
Measure
Used to activate the specific measurement and calculation.
Trackball
Used to select the measurement item.
Used to move the measurement marker during the measurement.
Set
Used to confirm the operation.
Used to fix the position of the measurement marker during the measurement.
Change
Used to exchange the measurement point.
Clear
Used to remove all the measurement and calculation results on the screen.
Report
Used to view the measurement report.
