Full Digital Color Doppler Ultrasonic Diagnostic Instruments (Vet) User’s Manual V1.01
- 45 -
3.
Repeatedly press
to freeze the real time scan and unfreeze other images.
The probe direction mark is highlighted in real time scan and becomes gray in the frozen mode.
4. Press other imaging mode keys to exit the quad-splitting display.
9.2 Magnifying the Image
You can magnify an interest region on the imaging area.
Steps are as follows:
1.
Press
B
to enter the real time B mode.
2.
Press the
Zoom
key on the control panel to activate the magnification feature.
3.
A ROI displays on the imaging area. Adjust the size of ROI by moving the trackball and press the
Set
key to confirm.
4.
Adjust the position of ROI by moving the trackball. If you are not satisfied with the size, press the
Set
key again to adjust the size of ROI.
5.
Press the
Zoom
key to magnify the interest region.You can adjust the interest region, make annotation
on the region or perform measurement.
6.
Press the
Zoom
key again to exit the magnification feature.
You can press the
Zoom
to directly magnify the image in the Color/PDI mode, and press
Zoom
again to
exit it.
9.3 Freezing the Image
Press the
Freeze
key on the control panel,
displays on the screen and the current real time scan is
frozen.
You can perform measurement, make annotation or enter the cine mode in the frozen mode.
Press the
Freeze
key again to return to the real time scan.
9.4 Viewing and Cropping the Cine
The cine review is available by pressing the
Freeze
key in the real time scan, and schedule bar appears on
the screen.
