background image

Page 9 of 16

2019

/09

/11

K&K Single point swing # 040720001 - Instruction

One-time maintenance work

Four weeks after installation, all screw connections must be checked and tightened 

if necessary. In this case, the specified advice in the regular maintenance work e. g. to 

turning moments has to be observed.

Regular maintenance

1.  Routine visual inspection

1-1.  1x weekly (or different, determined by local factors)

•  Check the minimum space of the playground equipment for cleanliness.

•  Check playground equipment for consequences of vandalism, e. g. missing or 

damaged components.

•  Check playground equipment for the effects of weather conditions, eg. B. by 

storm or frost.

2.  Operational inspection

2-1.  1x monthly (or different, determined by local factors)

•  Check for visibility of the warning groove (red-colored ring on the swivel hou-

sing). If the ring is visible in a horizontal direction, there is a need for repair. See 
appendix A1 „Visual inspection of swivel at least once a month“.

•  Testing for smoothness of running. Relieve the swing platform and the uni-

versal joint from load. To check the swivel is slowly put into rotation by hand. If 

the swivel rotates without angular offset (well visible on the swing chains), it is 

fine and smooth of running.

•  Check swing chains and connecting elements for wear, replace if necessa-

ry. Please note that the screws and nuts are fastened hand-tight without 
over-tightening the hexagon socket.

•  Check plastic parts such as protective edges, linings, sheathing, sleeves, etc. 

for loss, signs of wear and damaged areas and replace if necessary.

•  Check the condition of the ground surface, if applicable, follow the instructions 

for the inspection and maintenance of shock-absorbing floors specified by the 
manufacturer / distributor of playground floors, especially with regard to the 
level of loose fill material.

•  Check the ground clearance of the swing platform.

Kaiser & Kühne Freizeitgeräte GmbH
Im Südloh 5 - 27324 Eystrup

 +49 4254 93150

 [email protected]

Содержание Pendulum Swing

















Отзывы: