manualshive.com logo in svg

KAESER M 64, Руководство оператора, Страница: 164 / 344

Поделиться
Скачать
KAESER M 64 Скачать руководство пользователя страница 164

4. In order to increase the pressure in the exhaust system, partially cover the exhaust discharge

pipe with a fire-proof object.
Soot will drain through the hose into the receptacle.

5. Shut down the engine.
6. Remove the hose and replace the plug.

It is recommended to blow out the spark arrestor with compressed air once a year.

Dispose of soot according to environment protection regulations.

10.7.7  Option lb

Engine air shut-off valve maintenance

Material Compressed air for blowing out

Petroleum ether or spirit
Cleaning cloths

Precondition The machine is switched off.

The machine is fully vented, the pressure gauge reads 0 bar.
The machine has cooled down.
All compressed air consumers are disconnected and the air outlet valves are open.

NOTICE

Adjusted engine air intake shut-off valve

The engine air intake shut-off valve does not close when flammable gas is drawn into the

engine:

The machine does not shut down? Destruction of the engine and explosion and/or fire are

possible.
➤ Do not move the valve adjusting screw.
➤ Have the valve set by a specialist workshop or KAESER SERVICE.

10 Maintenance

10.7 Maintenance of Optional Items

152

Operator manual    Portable compressor   
M 64  

No.: 9_5898 26  E

RAMIRENT

Содержание M 64

























































































































































































































































































































































Отзывы:

Нет отзывов