KAESER KOMPRESSOREN SIGMA CONTROL SMART MOBILAIR M82 Скачать руководство пользователя страница 157 | Manualshive

Страница: 157 / 418

KAESER KOMPRESSOREN SIGMA CONTROL SMART MOBILAIR M82 Скачать руководство пользователя страница 157

Putting in operation:

1. Install the cover of the service opening.
2. Replace the belt guard.
3. Turn on the «battery disconnect switch».
4. Close the doors.

10.4.9 Battery maintenance

➤ Check the charging system if the batteries discharge without obvious reason.

10.4.9.1 Safety

Danger of acid burns from escaping electrolyte!
➤ Wear appropriate protective clothing including acid-proof rubber gloves.
➤ Always wear eye and face protection.
➤ Do not tip the battery. Electrolyte may escape from vent holes.
➤ Work with caution.

When working on batteries, comply with the following safety signs:

A warning label with safety signs is attached to the battery.

Fig. 60 Safety signs - warning labels on the battery

➤ Take heed of any safety signs on the battery warning label.

The individual safety signs have the following meaning:
■

1

– Fire, sparks, open flame and smoking are forbidden!

■

2

– Eye and face protection must be worn because of the danger of acid burns.

■

3

– Keep children well away from batteries and acids!

■

4

– Wear protective gloves, batteries are filled with caustic electrolyte!

■

5

– Observe the battery manufacturer's instructions!

■

6

– Follow the safety rules, explosion hazard!

Further instructions on working with batteries:

➤ Do not remove battery terminal covers unnecessarily.

10 Maintenance

10.4 Drive engine maintenance

No.: 901783 08 USE

Operator Manual Portable Rotary Screw Compressor
MOBILAIR M82 SIGMA CONTROL SMART

143

«
...
155
156
157
158
159
...
»

Содержание SIGMA CONTROL SMART MOBILAIR M82



































































































































































































































































































































































































































Отзывы:

Нет отзывов