4. Press «Enter».
The setting is applied.
5. Press «Escape» repeatedly to leave this menu.
Result The «Time control» key is activated.
8.6.1.4 Activating time control
Precondition The «Time control» key is activated; see chapter 8.6.1.3.
➤ Press the «Time control» key on the SIGMA CONTROL 2 operating panel to activate the time
control.
Result The
Time control LED on the operating panel of the SIGMA CONTROL 2 signalises with green
continuous light that the machine is operated with activated time control.
The time control of SIGMA CONTROL 2 switches the machine according to the defined switching
points of the time program.
8.6.2 Setting the company shut-down
In addition to the weekly repeating settings of the time control, you can also set a longer lasting
shut-down time. For company shut-down, see the time as follows:
Precondition Access level 2 is activated.
1. Open the 5.4.2
<Configuration – Compressor start – Compressor off> menu.
2. Use «Up» or «Down» to select the
Start line.
6 . 1 b a r
0 8 : 1 5 A M
8 0 ° C
Header
5.4.2 Compressor off
Menu
·········
Holidays
:
☐
Start
:
01/01/21
Active line
00:00AM
End
:
01/01/21
03:00AM
3. Press «Enter».
The display for days
00.00.00 flashes.
4. Use «Up» or «Down» to set the day.
5. Press the «Right» arrow.
The display for months
00.00.00 flashes.
6. Use «Up» or «Down» to set the month.
7. Press the «Right» arrow.
The display for years
00.00.00 flashes.
8. Use «Up» or «Down» to set the years.
9. Press «Enter».
The setting is applied.
10. Press «Down».
8
Initial Start-up
8.6
Machine start and machine stop
98
User Manual Controller
SIGMA CONTROL 2 SCREW FLUID ≥5.0.X
No.: 9_9450 12 E
