manualshive.com logo in svg

KAESER KOMPRESSOREN M250, Руководство оператора, Страница: 155 / 426

Поделиться
Скачать
KAESER KOMPRESSOREN M250 Скачать руководство пользователя страница 155

10.5.3  Changing the cooling oil

Drain the oil completely from the following components:
■ Oil separator tank
■ Oil cooler
■ Oil pipes

➤ Always change the oil filter when changing the oil.

Material Cooling oil

Receptacle
Drain hose with hose coupling is disconnectedly laying at the machine
New gasket for the drain plug
Funnel
Cleaning cloth

Precondition The machine is shut down.

The machine is standing level.
The machine is fully vented, the pressure gauge reads 0 psig.
The machine is at operating temperature.
All compressed air consumers are disconnected and the air outlet valves are open.
The «battery isolating switch» is off.

Risk of burns from hot components and escaping oil!
➤ Wear long-sleeved clothing and gloves.

➤ Open all the doors.

10.5.3.1 Draining the cooling oil

The cooling oil is drained through a drain hose at the oil separator tank and the oil cooler. The air‐

end and air pipe are drained through drain plugs.

10 Maintenance

10.5 Compressor Maintenance

No.: 9_9570 07 USE

Operator Manual    Screw Compressor  
M250  SIGMA CONTROL MOBIL

141

Содержание M250











































































































































































































































































































































































































































Отзывы:

Нет отзывов