KAESER KOMPRESSOREN EPC 150-2-G страница 73 Скачать руководство пользователя | Manualshive

Страница: 73 / 100

background image

10 Maintenance

10.1 Ensuring safety

Follow the instructions below to ensure safe machine maintenance.
Warning instructions are located before a potentially dangerous task.

Disregard of warning instructions can cause serious injuries!

Complying with safety notes

Disregard of safety notes can cause unforeseeable dangers!
➤ Follow the instructions in chapter 3 'Safety and Responsibility'.
➤ Allow maintenance work to be performed by authorised personnel only.
➤ Make sure that no one is working on the machine.
➤ Ensure that all service doors and panels are locked.

When working on live components

Touching voltage carrying components can result in electric shocks, burns or death.
➤ Work on electrical equipment may only be carried out by authorised electricians.
➤ Switch off and lock out the power supply disconnecting (isolating) device and check that no

voltage is present.

➤ Check that there is no voltage on potential-free contacts.

When working on the compressed air system

Compressed air is contained energy. Uncontrolled release of this energy can cause serious injury

or death. The following safety concerns relate to any work on components that could be under

pressure.
➤ Isolate the machine from the air main by closing the user's shut-off valves.
➤ Vent all pressurized components and enclosures.
➤ Verify the absence of pressure using a suitable measuring device (pressure gauge).
➤ Do not open or dismantle any valves.

When working on the drive system

Touching voltage carrying components can result in electric shocks, burns or death.
➤ Switch off and lock out the power supply disconnecting (isolating) device and check that no

voltage is present.

➤ Do not open the cabinet while the machine is switched on.

Further information Details of authorised personnel are found in chapter 3.4.2.

Details of dangers and their avoidance are found in chapter 3.6.

10 Maintenance

10.1 Ensuring safety

No.: 9_5753 24 E

Assembly and operating manual 2-stage piston compressor
EPC-2-G

63

«
...
71
72
73
74
75
...
»

Содержание EPC 150-2-G





































































































Отзывы:

Нет отзывов

Похожие инструкции для EPC 150-2-G

Бренд: KAESER KOMPRESSOREN Страницы: 246

Бренд: Daewoo Страницы: 20

Бренд: California Air Tools Страницы: 17

Бренд: Grizzly Страницы: 2

Бренд: Grizzly Страницы: 26

Бренд: Premier Страницы: 11

Q-SERIES Q-0600

Бренд: Manitowoc Страницы: 3

Бренд: Durr Dental Страницы: 27

Бренд: Danfoss Страницы: 2

Бренд: Danfoss Страницы: 16

Бренд: Certified International Страницы: 5

Бренд: Rac Страницы: 4

Бренд: Schulz Страницы: 6

Бренд: Taurus Страницы: 83

Бренд: Parkside Страницы: 55

Бренд: NARDI COMPRESSORI Страницы: 52

Бренд: North Star Страницы: 14

Бренд: North Star Страницы: 14

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды