8.4.2.5 Pan Control (iPAd Remote Control using Touch Screen Device)
Figure 29 Pan control touch pad (iPA remote touch screen)
When controlling the iPA remotely using a touch-screen device, the user can pan the PIM and Return Loss traces either
separately or together, depending on which part of the screen is touched. Details of the available panning modes are as
follows:
•
By touching the center of the screen, the user can pan the PIM and Return Loss traces together. The traces can
moved in both a vertical and horizontal direction.
•
By touching the vertical axis on the left side of the screen, the user can slide the PIM trace up or down while
leaving the Return Loss trace unchanged.
•
By touching the vertical axis on the right side of the screen, the user can slide the Return Loss trace up or down
while leaving the PIM trace unchanged.
•
By touching the horizontal axis at the bottom of the screen, the user can slide both the PIM and Return Loss
traces left or right while leaving their vertical positions unchanged.
Operating Manual
|
Passive Intermodulation and Return Loss Fault Ranging Device
40