Kaco blueplanet 87.0 TL3, Руководство пользователя

Страница: 49 / 115

9.4.2 Configuration via web user interface
Country-
spec. Set-
tings Level Display/
settings
Action in this menu/meaning
4 1 2 3 4
Overview Input screens for basic settings
4 1 2 3 4
Language
(11 languages)
1 Select the desired language for the user interface.
2 Confirm the action field.
4 1 2 3 4
Localization
Status
1 Select the current date and enter the time or press the button "Sync
with client device now".
2 Select a time zone.
3 Activate the NTP server and assign a name.
4 Obtain NTP server settings from DHCP.
5 Specify the temperature unit.
6 Confirm the action field.
4 1 2 3 4
Miscellaneous 1 Enter the device name.
2 Enter the degree of longitude and latitude of the installation loca-
tion.
3 Enter the plant ID.
4 Confirm the action field.
4 1 2 3 4
DC Parameter Input screens for generator and string collector.
4 1 2 3 4
String Combiner NOTE: Opportunity to configure a string collector.
String combiner moni-
toring
Status
F Select the monitoring function when the string collector is con-
nected.
Serial number of the al-
located string collector F Enter the serial number once the device has been installed.
NOTE: The serial numbers of the string collector that are not con-
nected directly to the device are entered on the segment controller.
Baud rate & number of
data capture units
9600 8n1
1 Specify the baud rate and capture interval.
2 If necessary, enter the number of the data capture unit.
Unit address
Unit channels
1 Specify the IP address of the string collector.
2 Specify the number of monitored strings.
3 Confirm the action field.
4 1 2 3 4
Constant voltage mode NOTE: Opportunity to deactivate the MPP seek mode in order to oper-
ate the device with a constant DC voltage.
Constant voltage
875 – 1300 [V]
F Set value for constant voltage control.
Constant voltage mode
Off | On
1 Activate or deactivate the constant voltage controller.
2 Confirm the action field.
4 1 2 3 4
DC starting voltage
1000 – 1450 [V]
NOTE: The device begins feed-in as soon as this DC voltage is present.
1 Set the starting voltage.
2 Confirm the action field.
4 1 2 3 4
Insulation resistance
100 – 2000 [kOhm]
1 Set threshold value (in 1kOhm steps) at which the insulation moni-
tor reports an error.
2 Confirm the action field.
KACO blueplanet 87.0 TL3 KACO blueplanet 92.0 TL3 KACO blueplanet 110 TL3 KACO blueplanet 125 TL3
KACO blueplanet 137 TL3 KACO blueplanet 150 TL3
Page 49
EN-US