KACO blueplanet 3.0 NX1 M2 KACO blueplanet 3.7 NX1 M2 KACO blueplanet 4.0 NX1 M2
KACO blueplanet 5.0 NX1 M2
Page 6
NOTE
Can’t find the smart Wi-Fi dongle in your WLAN list?
Sometimes you can’t find the smart Wi-Fi dongle in your WLAN list:
› Check
the blue LED light: Blue light indicates a successful connection to the router
› If the blue LED is not on t
ry to scan again.
3.2
Inverter parameter settings
3.2.1
Connect to inverter
Connect to the Wi-Fi stick with the app.
Enter the “Inverter list”.
1. Enter the “Monitor Device Details” page
2. Click the “Inverter List” item and enter the “Inverter List” page to connect to the inverter.
3. Click the inverter serial number
.
»
Proceed with inverter parameter settings.
Fig. 13:
Connect to inverter
NOTE
Scan device in Inverter List page
Under normal circumstances, you do not need to search for devices.
You might lose your previous inverter list and data due to the following cases:
›
The Wi-Fi stick has no communication with the inverter.
›
You have added a single inverter/multiple inverters to the Wi-Fi stick.
›
You have removed a single inverter/multiple inverters to the Wi-Fi stick.
›
You have replaced a single inverter/multiple inverters to the Wi-Fi stick.
