Page 15
KACO blueplanet 3.0 NX1 M2 KACO blueplanet 3.7 NX1 M2 KACO blueplanet 4.0 NX1 M2 KACO blueplanet 5.0 NX1 M2
4
Configuring parameters
4.1
Authorisation to change parameters
<Momentary values and settings> menu -
opened via <Available communication
devices> and <Search inverter>.
1.
Open <Settings> to set the parameters
for the initial commissioning.
Attention:
No password is required for
initial parameterization
.
However, if the parameters of the unit
need to be changed after initial
commissioning, it is necessary to enter the
password (protective function). The
password specific to the inverter must be
obtained from KACO Service.
2. Passwort im <Passwort> Feld eingeben
und mit <Verbinden> bestätigen.
Fig. 51.
Warning only at the first accidental abort
attempt.
Fig. 52.
Select parameter settings
Fig. 53.
authorisation required
