Page 9
KACO blueplanet 3.0 NX1 M2 KACO blueplanet 3.7 NX1 M2 KACO blueplanet 4.0 NX1 M2 KACO blueplanet 5.0 NX1 M2
2
Operation Mode
2.1
Operating mode for normal operation
You have made all the necessary basic
settings.
1. Switch to <Operating mode> to view
the parameters of an <Available
inverter>.
2 Now directly carry out the desired
parameter settings that are listed under
<Settings for>. The menu of the
<communication device> can be reached
via
.
»
The communication device is
connected to its mobile terminal.
Fig. 30.
Select operation mode
Fig. 31.
Choose inverter
2.2
Operating mode of the communication device
<Communication device> is registered
in the customer WLAN network and the
router is connected to the Internet.
Note:
The device supports Modbus /TCP
and the usual SunSpec models. If there
are security concerns, write access can
be disabled via the SunSpec register.
Signal transmission is via an installed
RS485 line.
1.
Select <Running mode>
-
Data uploading mode
–
data from
connected devices is uploaded to the
KACO cloud server for evaluation.
- Modbus-TCP Server-Modus
– By
default, the communication device
receives the Modbus TCP or SunSpec
commands and a connected data logger
responds to them.
2. Confirm selection
»
Operating mode of the communication
device set.
Fig. 32.
Selecting the operating mode of
the communication device
Fig. 33.
Select mode
