Kaba Simplex 1000 Series Скачать руководство пользователя страница 1

Страница: 1 / 3

Access Control - 1000 Series PBL FAQ

Note:

If your lock is opening on every turn of the knob or lever, except upon entering a code,

this may be a ZERO CODE. Before attempting to remove the lock from the door, refer to the

troubleshooting procedures outlined at bottom of this document for a zero code

symptom/solution.

1000 Series FAQ

Changing the Code / Combination

The door must be open.

On models with the passage feature, make sure the passage feature is disengaged: turn knob

or key should be in vertical position (A)

(see figure 1)

http://www.kaba-ilco.com/access_control/support/pbl_faq/changing_code_combination/1000_series.asp (1 of 3) [5/21/2004 11:13:59 AM]

Содержание Simplex 1000 Series

Страница 1: ...hooting procedures outlined at bottom of this document for a zero code symptom solution 1000 Series FAQ Changing the Code Combination The door must be open On models with the passage feature make sure...

Страница 2: ...ps then release The latch should not retract see figure 4 6 Choose your new combination write it down then enter the new combination depress buttons carefully a slight click should be felt as each but...

Страница 3: ...olution Follow the procedure for changing a combination except omit step 3 do not enter the existing combination PRINT THIS SECTION PREVIOUS PAGE http www kaba ilco com access_control support pbl_faq...