The PIN CODE is located on the black plastic tag provided with the car key on purchase.
The tag gives the mechanical code and the PIN CODE protected by a black plastic film
(scrape off with a coin).
If the PIN CODE is lost, apply to a VAG
®
dealer for another one.
- press
ESC
to quit;
- press
ENTER
to continue.
The display will show:
- DATES INSERTION -
PIN CODE : XXXX
Keys number : Y
PIN
: XXXX
N. Keys
: Y
- Enter
the
PIN CODE
and press
ENTER
;
- Enter
the
Number of keys
to be stored in the memory and press
ENTER;
- Press
ESC
to quit;
- Press
ENTER
to continue.
The display will show:
CONNECTING ...
# # # # # # # # # #
-
Wait a few seconds to communicate with the immobilizer.
If a wrong PIN has been entered or there are errors during communication, the display will
show:
error message No. 1
(see Operating Manual chap. 10 – WARNING/ERROR
MESSAGES).
MEMORIZING KEYS
If communication has been successful, the display will show:
COMMUNICATION OK!
Sequentially insert
the keys and turn each
one to the ON position
Press any key ...
Memorization of the keys in the car will now begin.
-
Insert all the keys to be memorized one after the other, turning each one to the ON
position.
If errors occur during programming, the immobilizer warning light (located on the
dashboard) will flash rapidly. Repeat the operation.
-
Press a key to continue; the display will show:
6
