Kaba Registration Unit RFID 90 02
TM_ RegistrationUnits_201406_en.docx
27
6
Kaba Registration Unit RFID 90 02
6.1
Product description
The registration unit 90 02 with integrated
antenna and keypad, together with the control
unit, represents a fully-integrated solution for
access control with simultaneous convenient
identification of the user.
In addition, for identification in the event of
increased security requirements, it is also
possible to demand verification of the user via
entry of his/her personal PIN code.
This registration unit is suitable for both internal
and external applications.
Additional Product descriptions:
Door code entry for access without a badge
(Code lock function)
Control of alarm systems
6.2
Dimensions
Height incl. rear panel: 19,4 mm
Height spacer frame: 26,4 mm
External dimensions
Dimensions of rear panel/spacer frame
6.3
Installation
6.3.1
Preparation
If necessary, drill holes for the frame bracket.
A dimension drawing of the frame can be found above.
Surface cable mounting:
Use the spacer frame (only indoors).
Break open the cable inlet on the spacer frame.
Lead the cable away at the bottom or at the side in a siphon shape.
NOTICE
Only connect the wires when the power is switched off.
