W W W . K A A R T A . C O M
7 5
Figure 53: GNSS Correct settings.
G NSS CORRE CT SE TTING S
ROVER Importer
For processing Stencil Pro datasets, the rover file should be kept at
USER_BINEX
. However, if importing datasets
created on other devices
for processing on Stencil Pro, the rover file will need adjusted according
to file format of the roving device (
RINEX
,
UBLOX
,
RTCM3
, or
PLAIN
).
BASE Importer
The base importer file is automatically configured when a GNSS Preset
is chosen in the previous step. You can change the file format manually
by clicking into the dropdown menu and selecting a different file
format. However, file format should correspond to base station receiver
configuration.
RTKLib First Elevation
Mask (degree)
An elevation mask excludes satellites with elevations lower than this
number (in degrees) from being used. Generally, a recommended
setting is between 10-20 degrees. Use the
First Elevation Mask
value,
in conjunction with the
Last Elevation Mask
value, to set a range for an
elevation mask.
RTKLib Last Elevation
Mask (degree)
An elevation mask excludes satellites with elevations lower than this
number (in degrees) from being used. Generally, a recommended
setting is between 10-20 degrees. Use the
Last Elevation Mask
value,
in conjunction with the
First Elevation Mask
value, to set a range for
an elevation mask.
RTKLib Solution Type
The
Solution Type
is the direction in time that the Kalman filter is run
on the data. Options are
forward
(starting at the beginning),
backward
(starting at the end), or
combined
(merges the results of forward and
backward).