manualshive.com logo in svg

Kaadas K13-3D, Руководство пользователя, Страница: 17 / 20

Поделиться
Скачать
Kaadas K13-3D Скачать руководство пользователя страница 17

5  Use your smart door lock 

Unlock from outdoor(Common mode)

unlock  by fingerprint

 

unlock  by card

 

unlock by Pin code 

1.unlock by face scan

 

Enter 
Pin 
code 

Push or 
Pull handle 

to unlock

Push or 
Pull handle 

to unlock

Push or 
Pull handle 

to unlock

Touch the pad screen by 
palm to lighten keypad; 

then entering the enrolled

 PIN code with end of [#]. 
After voice prompt “door 
opened”, push or pull handle 
to open the door.

When you close to the 

lock , the faces will be 
recogized automatically.  

After recognition 
succeeded , voice 

prompt door opened , 
then push or pull handle 
to open the door . 

Place the enrolled finger 
properly on the fingerprint 

sensor area. After voice 

prompt “door opened”,
push or pull handle to 
open the door.

Place the enrolled card 

properly on the card icon 
area. After voice prompt 
“door opened”, pressing 
down the handle to open

the door.

Fingerprint 

sensor

Card 

Reader 

area    

Note:
1. Under common mode, when you verify facescan, fingerprint , card or Pin code more than 5 times incorrectly , the lock will 
   have a lockdown for 100S.
2.Under security mode, when you verify any two of facescan, fingerprint , card or Pin code more than 5 times incorrectly , the 
   lock will have a lockdown for 100S.

Содержание K13-3D





















Отзывы:

Нет отзывов