manualshive.com logo in svg

Kaadas K13-3D, Руководство пользователя, Страница: 14 / 20

Поделиться
Скачать
Kaadas K13-3D Скачать руководство пользователя страница 14

Delete user PIN code

Enroll User Card

Under master mode:

Delete user face

Under master mode:

Under master mode:

Delete user fingerprint

Under master mode:

“setting succeeded.
00-94 is normal user, and 95-99 is duress user which 
works with wireless module and trigger alarm when 

duress event occurs.

Press 1 for user setting, then press 4 to enroll card. Enter 
2 digital user number with # to confirm.

Press 1 for user setting, then press 5 to delete user face. 
Press 1 to delete single user PIN code and enter 2 digitals 
user number with # to confirm or stand far away around 
60cm  and look at the canara  till  Voice prompt : deletion 

succeeded.

Press 1 for user setting, then press 5 to delete user face. 
then Press 2 to delete all user face . Voice prompt : 

deletion succeeded.

Put the card closed to the card sensor area until one beep 
sound Voice prompt : Settings succeeded.

Press 1 for user setting, then press 6 to delete user PIN 
code. Press 1 to delete single user PIN code and enter 2 
digitals user number with # to confirm . Voice prompt : 
deletion succeeded.Press 1 for user setting, then press 4 
to delete user PIN code. 

Press 1 for user setting, then press 7 to delete user 
fingerprint. Then press 2 to delete all user fingerprint . 
Voice prompt : deletion succeeded.

Press 1 for user setting, then press 7 to delete user 
fingerprint. Press 1 to delete single user fingerprint and 
then enter 2 digitals user number with # to confirm or 
place finger on the fingerprint sensor until one beep 
sound. Voice prompt : deletion succeeded.

Press 1 for user setting, then press 56to delete user PIN
code. Press 2 to delete all user PIN code . Voice prompt : 

deletion succeeded.

Содержание K13-3D





















Отзывы:

Нет отзывов