-Factory reset:
Operations on lock
Open the door and keep the lock in "unlock" status
Open battery box and find the reset button.
Use a sharp thing to press and hold the reset button.
Keep holding the reset button for 5 seconds until hearing voice
guide.
※
Please use this procedure only when the network primary controller is
missing.
※
Default master pin code is “12345678”, please modify it after reset
(Refer to programming instruction).
Z-Wave Plus Info
Manufacturer ID: Kaadas (0x021D)
Z-Wave Device Type: Door Lock keypad
Z-Wave Role Type: Listening Sleeping Slave (LSS)
Product ID: 0x0001
Product Type ID: 0x0003
Supported Command Classes
Command
Version
Association Command Class*
V2