Installing the Z-Wave Plus Module
IMPORTANT: the batteries must be removed prior to removing and/or
inserting the network module:
Remove battery cover and batteries.
Remove and/or insert network module.
Re-install batteries and battery cover
About Z-Wave™
This lock is a security enabled Z-Wave product.
Inclusion (join) is detailed in Programming instruction under “Network
pairing instruction”
Exclusion (log off) is detailed in Programming instruction under
“Network pairing instruction”
This lock could be integrate with any Z-Wave controller, from any
manufacturer. The lock will have limited functionality if integrated with a
non-secure controller.
Z-Wave function descriptions
This device is a security enabled Z-Wave Plus product that is able to
use encrypted Z-Wave Plus messages to communicate to other security
S2 enabled Z-Wave Plus products. This device must be used in
conjunction with a security enabled Z-Wave controller in order to fully