Rope Sensor Installation Guide
Familiarize yourself
with the sensor and how
it assembles before use.
If you have any questions, please contact our
Customer Service Department at
1
-
800
-
993
-
9399 or go to
www.KTechOnline.com
Step 1:
Using a 7/16 wrench,
unscrew the tension bolt
and pivot the bar away
from the yellow metal.
Step 2:
Mount the sensor on the
rope as shown in Fig. 3:
between the center and
outer bobbins, inside the
groves.
Step 3:
Using a 7/16 wrench, fully
hand tighten the tension
bolt until the bar sits flush
against the yellow metal.
Step 4:
Repeat steps 1
-
3 for all
rope sensors.
BEFORE
(OPEN)
AFTER
(CLOSED)
BEFORE
(CLOSED)
AFTER
(OPEN)
Fig. 1
Fig. 2
Fig. 3
Fig. 4