K-Tech
ET401
Installation Guide
Serial Number:
____________________________
Date Installed:
____________________________
Installed by:
____________________________
Phone Line #:
____________________________
Phone line Voltage:
48VDC (POTS or CO line)
24VDC (PBX System)
Other ____________________
Phone Number(s)
Dialing:
1.
___________________________________
2.
___________________________________
3.
___________________________________
4.
___________________________________
5.
___________________________________
Voice message
________________________________________________
________________________________________________
________________________________________________
THE INFORMATION BELOW IS IMPORTANT.
YOU MUST HAVE THE SERIAL NUMBER
AVAILABLE WHEN CALLING TECH SUPPORT.
SERIAL #
K-Tech International Inc.
Part # PCB045 Rev. ___
4 _ _ _ _ _
SPECIFICATIONS
Power Requirements:
Phone line with 30mA minimum loop current
Maximum phones per line - recommended: 1
Physical Dimensions
Sentry:
Enclosure:
7.5” (19.5 cm) X 5.” (12.7 cm) X 2.0” (5.1 cm)
Liberator:
Enclosure:
6.75” (17.1 cm) X 6.25” (15.8 cm) X 1.0” (2.6cm)
Fortress Std:
Front Plate:
12.5” (31.8cm) X 10” (25.4cm) X 0.125” (0.3 cm)
Option:
10.5”(26.7cm) X 6.5”(16.5 cm) X 0.125”(0.3cm)
Rear Enclosure:
8” ”( 20.3 cm) X 4.75”( 12.0 cm) X 2.3” (5.8cm)
Rough cut:
8” X 5.” ( 20.3 cm X 12.7 cm)
Commander :
Mounting plate:
Std:
9.5” (24.1cm) X 4.75” (12.1 cm) X 2.0” (5.1cm)
U model:
7” (17.8 cm) X 4.75” (12.1 cm) X 1.5“ (38.1 cm)
Keep This Booklet for
Reference
Additional information is available at
www.KTechOnline.com
K-Tech International, Inc
BOK062 041811 Printed in USA
56 Ella Grasso Ave
Torrington, CT 06790 USA
Phone
(860) 489-9399
Toll Free (800) 993-9399
Fax
(860) 489-4399
Email: [email protected]
Website: www.KTechOnline.com
1-800-993-9399
FCC Information
The K-Tech ET401 Series meets FCC 15 and 68
standards, IC and ETL approval.
FCC Registration # ERC-USA-44557-TE-T
IC# 164311441A
REN (Ringer Equivalence Number) 1.0
